New exhaust at last.

[H..]

http://img80.imageshack.us/img80/2108/crimbo195do1.jpg
By haydnfawn (http://profile.imageshack.us/user/haydnfawn) at 2008-07-10

http://img354.imageshack.us/img354/1360/crimbo200ag4.jpg
By haydnfawn (http://profile.imageshack.us/user/haydnfawn), shot with E6 (http://profile.imageshack.us/camerabuy.php?model=E6&make=SANYO+Electric+Co.%2CLtd) at 2008-07-10

Cheers.

H..

[KISS MY RSV!]

Nice looking exhaust mate!

I bet its bloody loud aint it!:thumbup

[agreat1]

wow
where did you get it
how much was it
is it on both sides
can i ahve one plz

[heroblob]

How loud is it compared to akros without baffles.

[BIG UN]

fook me,that looks well,full wets and no lights or mirrors,is it strictly a track bike dude?
will the exhaust pass the decibel limit?
that bike looks evil as fook! luv it.

[H..]

http://img354.imageshack.us/img354/6193/crimbo193or3.jpg
By haydnfawn (http://profile.imageshack.us/user/haydnfawn), shot with E6 (http://profile.imageshack.us/camerabuy.php?model=E6&make=SANYO+Electric+Co.%2CLtd) at 2008-07-10

This is only a proto type for testing. With the full baffles in it is similar to akros with the baffles out, about 100dbs and have a lovely rasping note. With the baffle out it’s pretty loud, a bit like cored cans only deeper. The bike’s been MoT’d now so from tomorrow it’ll be on the road and the 07’s gonna be on holiday for a bit. The system has taken some time to get to this stage but should be in limited production in a month or so. Not cheap I’m afraid won’t be far short of a grand, but is going to make those old dustbins look a bit dated. I’ll most likely take it up to Peterborough on Saturday for the Club Aprilia bash.

Cheers.:cheers

H..

[Spydz]

Cant wait to hear it mate, see you at Yaxley :)

[BIG UN]

itll certainly warm your boots up lol.
bet it sounds ace.

[mark58]

Same thoughts here, looks awesome, would finish it off to have a single sided swinging arm to make a stunnng looking bike..

[supertedlover]

Love it, great to see something different, gets my vote big time:thumbup

[BIG UN]

we need a sound clip!!!

[supertedlover]

2nd that, does that swingarm look as good as a naked Angelina and you with a free ticket to nob her or is that just me? :pirate

[BIG UN]

looks like that crash bungs seen a bit of action too dude.

[heroblob]

I would have liked to have seen that outlet turn and go back like the GP bikes, and to have had another the other side. looks a little to buel for me, but bet it sound the bollocks. has it been tuned for the motor with regard back pressure and pulse tuning, or is it just a hunk of pipe welded to fit the space. professional headers are computer designed to be specific engine characteristics.

[Badger]

What are the headers H

[H..]

Hi guys, thanks for your views. This system is not the finished article. The end pipe is going to be a little shorter and possibly slash cut to follow the body line. The headers on this one are standard Aprilia ones with other options in the pipeline. I’m not going to get it on the dyno again till next week, having said that my main reason for producing this system was to enhance the appearance of the bike without affecting performance too much. The pipe has three stage removable baffles as I had hoped to get the thing under 101 db’s for Brans GP. I’ve spent several hours in the last two days just looking at it, I love it.:D:D:D

Cheers.

H..

[caterpillar]

Looking good H. I'd give a big :thumbup for the hot rod esque slash cut, with possibly a slight up turn.

Someone at Yaxley please get a vid for a sound check!! :pirate

[BIG UN]

have you made this just for yourself or are you planning on selling it h?

[H..]

Hi Big Un, I've wanted a system like this for the last couple of years and it's been a bit of a labour of love and I've blown a wad on it.. Still I've got one now, If anyone else wants one that's fine I'll see what I can do but it's going to be limited.

Cheers.

H..

[gaz]

I take it your mot tester is very friendly.

No indicators, racing wets, no rear disc, no mirrors, and ball broken off front brake lever. lol.

I know you've obv had it appart.

Exhaust looks good, get it on a dyno with a before and after run to test it against std

[sharky]

I've got to say that i see and heard this bike on saturday and it looks the buisness as for the sound it is loud but not as loud as you would think when H first pushed that button i thought oh fcuk this is going to be loud but i think H has got the loudness and sound just about right if i had a spare grand i would have one,unless H you want to use mine as a test bed for the 01-03 model when you develop one..............

[carpe diem]

Hey now thats a good idea sharky, he could use mine too see how it sounds on a red one....:biggrin

[MilleBoy82]

sounds like a plan he could use mine to see how it sounds on a rebuilt one :biggrin

[Scubacat]

Whatever happened to this? Are they for sale?

[H..]

The whole bike's now for sale for 4K as I'm savin' up for a V4.

Cheers.

H..

[BLADE]

Looks awesome fella

[Sabre]

It does look very cool

[H..]

Best lookin' Factory in the whole of Fetcham!

Cheers guys.

H..

[Scubacat]

The whole bike's now for sale for 4K as I'm savin' up for a V4.

Cheers.

H..

So you are NOT selling them then?

[Scubacat]

Before you sell the bike can we get a youtube vid of it running so we can hear it? Did you ever make more than one?

[H..]

HI Scuba' the need to sell the bike real quick has now passed and I have an Aprc and a roof. I am going to have one last atempt at getting a few made and then I will sell the bike and the exhaust fitted to it. I know there are a few guys aut there who would like one so I'll get my finger out and see what I can come up with.

Cheers.

H..

[Scubacat]

I think a video of it running, revving, and with a few drive byes would go a long way to getting more people interested. Look forward to hearing more.